I’m going back through my old photos for a website update. This one is already on my website, but I thought I would see what the current software (and my current Lightroom chops) could do with some of the files. This is the first one I’ve tried this go-around, and I think I’ve made significant improvement.
I made a Snapshot in case I messed something up, then hit Reset. Using the Adobe Landscape profile, I went though my usual routine with contrast, etc. I added a gradient to the sky, using a Luminance Mask to apply the settings only to the lightest parts. Overall contrast and saturation is much better, which is hard to see in the web versions.
It will be interesting to see what I can do with other files. This may take a while…. 😉
Several of the commenters on my previous post mentioned the excessive-ness of the huge cottages on Lake Geneva. Kathy & I did find a few that would be more reasonably sized, assuming you could afford the lot. The top image is just the boat house for a larger mansion. The A-frame would be just about right, I think. Anyway, wanted to show what the folks on my side of the wealth curve would buy if we could! 😉
One of the highlights of our visit to Wisconsin was a cruise on Lake Geneva with our friends Jeff and Mary Pat. The cruise featured a look at the numerous “summer cottages” that surround the lake. They ain’t like any “cottages” I’ve ever seen, and would make a lot of the so-called “mansions” around Lake Norman look like guest houses.
I didn’t attempt to document them all, but I did take some photos of some of the most noteworthy ones. It was a nice cruise, a pleasant afternoon with fun people. Good weather and smooth sailing! 🙂
Our first overnight stop on the return home from Wisconsin took us to the town of Jasper, Indiana. We chose Jasper primarily because it was just about the right distance for the day, but also because it looked like it had an interesting downtown area for us to check out.
I was initially attracted by the fact that Jasper has a train station, but we noted that the train station was an anchor for a new mixed-use development called River Centre. A brand new Fairfield Inn sits along the Patoka River and is connected to the Jasper Riverwalk, a 4.5 mile multi-purpose trail that connects several businesses and restaurants, and winds through a scenic section along the river.
Across the river from River Centre and connected by a very nice steel bridge is the historic Jasper City Mill. The current mill building is a replica of a mill that was established on the site in 1817 and was in operation until 1933. Among the customers of the mill is said to have been Thomas Lincoln and his son Abraham Lincoln, who bartered goods for corn meal in 1828.
We got into town late and left early, and it was a Sunday so not too many businesses were open. But we got a good look at the town – enough to determine that it would be worth a re-visit. It is “on the way” to a lot of places we hope to visit, so we will be sure to add Jasper to the itinerary on a future road trip!
If there is something you really want to do, don’t avoid doing it just because things you can’t control make it uncomfortable. Go! (Me)
We had been waiting for a clear evening to try and see the Comet NEOWISE and finally got it on Sunday. Unfortunately, our neighbors are afraid of the dark and we have way too many lights around to see the sky. We had pre-scouted a place out in the country for just such an occasion, and ventured out there after dark on Sunday.
The comet was harder to spot than I thought it would be, but we finally did locate it with binoculars. I tried to make a decent photograph of it, but between not being able to focus and using a too-long shutter speed for the focal length of my lens, I got mostly junk. The in-focus shots are sharp but have long star trails, and the out of focus shots have blurry lines.
Most night photography how-tos suggest using a wide-angle lens, but I was using a longer lens because I knew that with a wide-angle lens the comet would be even less visible than it was with the telephoto.
The first shot was taken at 55mm for about 10 seconds, and even it has some blur. The second one was taken at 200mm, but I made a rookie mistake by using a 12 second exposure when it should have been about 5 seconds or less. Oh well, it was an interesting outing with or without photos and satisfied my desire to just see the comet. My philosophy is that there are other people taking night photos far better than mine, so I don’t need to make my own, just look at theirs instead!
It’s not often we get to stay at a brand-new hotel. It’s even more rare to be the very first people to stay in a hotel room. But that was our experience at The Sessions Hotel in Bristol, VA. The hotel had just opened a week or so before our visit, and a paper in our room asked for feedback since we were the first ones to occupy the room. Cool!
When we were making our plans to return home from Wisconsin, Bristol was in the right location for our last night’s stay. We had been to Bristol before, but had only stayed at the usual next-to-the-freeway chain hotels. When I searched on hotels, one of the search results was ‘The Sessions Hotel, A Tribute Portfolio Hotel’ by Marriott in downtown Bristol. The price was a little higher than the freeway-side options, and the location was shown as being right in the center of town. Whenever possible we like to be “in town” so we can walk to dinner and shops instead of searching for a place to park. So what the heck?
Bristol is a historic town situated on the VA/TN border. In fact the VA/TN state line runs right through the middle of State Street, the main street through town. Bristol’s primary claim to fame is as the Birthplace of Country Music, so named because of “The Sessions,” recording sessions that took place in Bristol in 1927. These recording sessions launched the widespread appeal of musicians who, up until that time, had been known only locally in the areas where they performed.
According to the Marriott website, the Tribute Portfolio is a collection of boutique hotels designed to reflect the character of the city in which they are located, operated independently but under the Marriott umbrella. Each hotel has its own theme, decor and vibe.
The hotel occupies three buildings that previously housed a mill and warehouse. The public spaces and rooms were all designed around the theme of The Sessions. Music-inspired artwork, furniture and accessories abounds in the public areas, and each room is uniquely decorated with the theme of a specific recording.
From the hotel website:
“Situated in the heart of the Birthplace Of Country Music, our boutique hotel is named after the 1927 Sessions made by Ralph Peer and a few others. Bristol’s energetic passion for country music is reflected throughout the hotel’s thoughtful décor with curated pieces and musical offerings. Experience a free-spirited environment in repurposed buildings where rustic meets contemporary. Rest comfortably in uniquely designed rooms and suites with exposed brick and modern furnishings. Indulge at Southern Craft restaurant, an upscale wood fired smokehouse, offering award winning barbecue, classic favorites and sides. Sip cocktails on the rooftop bar and lounge by the cozy fire pit overlooking the city of Bristol. Get pampered at the Vision Salon and Day spa with invigorating spa treatments and body rituals. Host a special event in our indoor or outdoor music venues with a music stage or attend one of the concerts at our Bristol, VA hotel.”
Our room was Room 224, which was a Junior Suite. The room was named after the tune “Tell Mother I Will Meet Her,” recorded by Ernest Stoneman. The room number plaque outside the room had a replica of the record label, and in the room was a framed copy of the lyrics. The “Do Not Disturb” sign was a wooden record with “Time For A Rest” imprinted on it.
We didn’t explore the hotel much since we were only there overnight, but we certainly enjoyed our room. We did not, for example, sample the rooftop bar, but we did have breakfast at the adjacent restaurant. A lot of the amenities were still being finalized, as there were still painters touching up some of the rooms and hallways during our stay. Our conversation with the manager indicated that there are plans for an outdoor music venue and other additions in the near future.
Overall the hotel was nicely done. The decor and furnishings are of high quality, and the bathroom is the kind that makes you want to call a bathroom remodeler as soon as you get home! The hotel is a couple of steps above the typical “chain” hotel, and just the kind of thing that Kathy & I look for when we’re looking to get away but don’t want to drive too far. Bristol isn’t exactly known as a foodie mecca, but we don’t consider ourselves foodies anyway. There are plenty of unique, interesting and local places to eat – just the kind of place we look for. Who could pass up a hotdog or two from a place called the Earnest Tube (as in the musician Ernest Tubbs) or a place called The Angry Italian? We did pass them up this time, but would definitely put them on the agenda for another visit!
Bristol and The Sessions Hotel is definitely on our short list of places to return to when we are looking for a few days away. We hope they can start the live music back up soon. It would be a great place to visit this fall when things cool down and the leaves heat up!
“Big Things In A Small Town” That is Casey’ Illinois’ claim to fame, and the reason we stopped off on our way home from Wisconsin. Scattered around the downtown area of this town of about 3,000 located just off I-70 between St. Louis and Indianapolis. Casey only has one traffic light, and most everything is walking distance from the center of town.
Casey holds eight Guinness records, including giants such as largest wind chime, golf driver, knitting needles, giant chair, giant mailbox, wooden clogs, rulers and giant bird cage, constructed by businessman Jim Bolin.
We didn’t visit all of the attractions, and unfortunately didn’t try the ice cream 🙁 but we did do a pretty reasonable job of visiting the sights.
For our drive from Wisconsin back to Charlotte, we decided to stick completely to back roads. Taking 2 1/2 days to make a drive that many would make in 1 is just the way we roll. We encountered a number of interesting places along the way, some planned, many unexpected.
Case in point is our stop in Dwight, Illinois. We were attracted to Dwight because of the old Texaco gas station that is associated with Route 66. While at the gas station, I spoke with the docent there who encouraged me to visit some of the other landmarks in town, including the historic railroad depot. Never one to pass up a railroad depot unknowingly, we headed into town.
In addition to the depot, there is a bank building designed by Frank Lloyd Wright and a building that once housed an at-that-time famous treatment center for alcoholism. We couldn’t find the windmill or the church immediately and decided to not take more time looking.
My grandfather, a wise man who taught me a lot, always said that we should never complain about birthdays or haircuts. He didn’t have much hair, so birthdays were a big deal. 😉 My brother and I have carried on the birthday tradition, although we both have much more hair than he did. 🙂
To steal a statistic from Monte – today is my 22,647th day on this planet.
Celebrating doesn’t have to be a big deal, and this year is no exception. I’m looking forward to a quiet afternoon with family – as quiet as an afternoon with a 4 1/2 year old can be! – and a nice easy dinner of spaghetti and meatballs, takeout from our favorite Italian restaurant. With wine!
Kathy and I have been watching the developments in other parts of our country and can’t help but wonder what the outlook for travel will be over the next few months and longer. We just had a nice road trip to visit a number of our closest friends and family members and are privileged to have our closest family right here in Charlotte with us.
We look forward to our next adventure, but in the meantime we are thankful to have family, friends and memories to carry us through.
I’ve been fans of Really Right Stuff (RRS) products since I purchased an L-bracket and clamp for my Mamiya 7 camera back in (approximately) 2002. Paying my ‘RRS Tax’ has been an important part of each camera purchase since then. The rare exception was with the brackets for my Fujifilm X-T1 and X-E2. I bought very well-made brackets from a company in England which is (sadly) no longer in business. I still have the bracket I purchased for the Mamiya, as it is a “universal” model and has fit every camera I have owned since. Handy for those few weeks while I’ve waited for the “real” bracket to be available!
The biggest issue with Really Right Stuff products is that they are Really Really Expensive. But like owning Craftsman tools or All-Clad cookware, you can’t go wrong buying the good stuff. I currently own a RRS tripod with ballhead, and until recently had two ballheads. I’ll never need to buy another tripod. Unless I change my mind and decide I need a smaller one. 😉
When I placed the order for my X-T4, I also ordered an L-bracket from another manufacturer. That bracket was supposed to cost about $65 less than the RRS version, and because it was also a quality brand, I figured I would save some money. Because it is a brand-new camera, neither company had released their L-brackets at the time I got my camera.
I kept checking the Kirk and RRS websites for information on their delivery times. Kirk’s website said that they didn’t expect to ship until late July. As of the time of this post, the bracket is showing up on their website for ordering but is out of stock. The photos on the Kirk website show a product that isn’t (in my opinion) as well designed and integrated with the camera as the RRS version. Plus it is $25 more than I originally expected, making it nearly as much as the RRS while not being nearly as nice.
One day I checked the websites and the RRS version was in stock and shipping. I ordered one immediately and cancelled the order for the other one. Of course it came 3 days after we left for our trip to Ohio, but it was waiting for me when I returned.
The photos will show better than my words will, but the RRS product is exceptionally well designed. The relatively recent addition of the magnets for mounting the Allen wrench is genius, and the sliding plate to accommodate accessories in a vertical configuration is a nice touch, much better than some kind of add-on adapter.
I haven’t had a chance to actually use the bracket in real life, but hope to be able to put it through its paces soon. Of course as long as it works there won’t be a lot more to say!